Empty folder is not deleted. How can I delete a non-deleted file from the computer (protected, damaged, system, used)
- Another deletion method is using the Task Manager.
- The third method is deletion using bootable flash drives or disks.
- The fourth method of deletion through the program Unlocker
- The reasons for the appearance of non-deleted objects in the computer
Each user has encountered a similar problem when a file is stubbornly unwilling to be deleted for an unknown reason! Here it is impossible to delete the file, and everything, there is no access! Most often, an inscription is displayed that the deletion of this object is impossible, because it is currently used by some application, access to the object is prohibited, there is protection against deletion, and more. But what should the user do if the malicious object does need to be deleted without fail ?! Yes, and do not need in the computer a different trash that constantly accumulates and loads the entire system! Should know the solution to such troubles. This article discusses several methods to achieve the desired result, which helps both to delete protected files, as well as damaged, used and system ones.
Sometimes, if you cannot delete a file, a simple solution works - close all programs used by the user. For example, you cannot delete a music file if it is currently playing on your player. Only after closing the player window, you can start deleting objects. By the same principle, you need to close other programs if there is no access to the file. Just in case, you can overload the computer and then try to delete the file again. It turns out? Fine! If the attempt turned into a failure, then proceed to the second step, which can help.
Another deletion method is using the Task Manager.
It is important to find out - you can find and close not an obvious program or process that / that uses a stubbornly non-deleted file from unnecessary ones. This can be done through the "Task Manager"! To call this dialog box it is worth knowing the following: use the key combination "ctrl" + "alt" + "delete" (for old operating systems). Windows systems ) or a combination of "ctrl + shift + esc" / "Windows" + "X" (if the OS version is from Windows 8 and further). In the Task Manager window that appears, you need to find out the program or process that uses this object, and complete its work. After that, you can delete an unnecessary file, the objects being deleted are no longer such.
ATTENTION! Make sure the object is not an important component. operating system ! If this is ignored, then it is possible that deleting this file will entail irreparable consequences for the entire system and will have to reinstall the OS again. Delete only those files that you understand!
The third method is deletion using bootable flash drives or disks.
This method is quite practical and allows you to delete almost any folder or file from the system of your computer. To do this, you will need to start the computer using one of the LiveCD drives, a resuscitation disk or a special USB flash drive (if there is none, it’s better to get it as soon as possible) to boot the OS. When working with these drives, you will be able to use the familiar interface of the Windows operating system. It is important to know that when booting a system from such types of drives, the system will most likely change its names. hard drives and call them completely different letters. Therefore, carefully look at which object you will delete or use the dir c: command (to bring up objects located on the C drive you are used to).
When working with bootable flash drives / disks, you need to press the "Shift" + "F10" combination at any time during the boot. This will allow you to get into a special command line . Here you can also select "System Restore". It is the command line that can, by the way, be worth knowing, be used to solve many other problems.
After starting the system from these drives, using the command line, you can selectively delete all unnecessary information from the hard drives of your computer. Now Windows cannot prevent you from doing this! After all, it is disabled and its protection of all objects from being deleted is disabled.
The fourth method of deletion through the program Unlocker
This method is the easiest and effective! Today, the Unlocker program, probably, as it will be useful to learn, is the most popular method of doing the deletion of an object that is occupied by programs or processes and is not accessible to it. What is so convenient this program fixing undelete objects? There are several reasons: it is absolutely free, has ease of use and easily solves the problem of deleting protected files. After installing Unlocker on your computer, all you need to do is to click on the ill-fated object with the right mouse button and select the “Unlocker” item in the pop-up menu. Using portable version programs need only run it and in the opened window select desired folder or an object to be deleted.
The principle of the Unlocker program is based on the first described method of deleting objects. The program itself performs the operation of unloading from the memory of the system of those processes that prevent the desired object from being deleted, such a process usually creates a problem. Here are just Unlocker able to complete even those processes that are not visible normal user in the “Task Manager” window!
The reasons for the appearance of non-deleted objects in the computer
After the procedure of cleaning your computer from unnecessary files You can choose two ways to further behavior. You can continue to work with the system in the same manner and periodically clean it from such problem objects. And you can understand the reasons for their occurrence, why files are created that are not accessible, to prevent their occurrence, which will significantly reduce total load system and increase its performance.
The fact is that Windows treats all files you are trying to delete very carefully! This is of course good when you are a novice user and accidentally deleted the wrong file. Pulling it back out of the basket will not be difficult. Another thing is when you are already quite an experienced user and intentionally trying to delete a file. Windows carefully puts it in the trash for possible recovery. Now you need to empty the trash to completely remove the object from the system. By the way, there is a method to avoid the recycle bin and delete the file past it. To do this, press the key combination "shift" + "delete". Do you think the files are erased after clearing the recycle bin? Not! Just Windows hides files in the far corner, where we can get them using special tools. This file will be erased only after multiple rewriting. Until that time, it will take up space on the hard disk and be powered by system resources, reducing the performance of the entire system.
Non-deleted files (protected, damaged, system, used) appear as a result of various system failures. This leads to the fact that Windows can not deal with these files, and she closes access to them for security purposes. For example, if the installation process of a program is disrupted, incompletely saved files “remain” in the system. The system cannot deal with similar types of files and simply “quarantines them”. You may also encounter viruses that cannot be removed from the computer. It happens that virus file deleted, and after a while appears again. Therefore, it is important to have a reliable computer antivirus program , which will help prevent the entry of such virus files. Viruses are and suspicious files which have a weight of 0 kilobytes. No utility can remove them from the computer, but antivirus scanning will cope with this problem in a couple of minutes.
Date: 02/19/2015 8:53
In this article, we will look at cases when you cannot delete a file on your computer, on an external hard drive, or on a flash drive. There are of course cases when you can try to delete a file or folder without resorting to some third-party utilities or programs, for example, as in my case that happened recently, I could not delete the video file, it was a movie and it weighed somewhere 25 gigabytes probably. When I tried to delete, the “Preparing for removal” window popped up (or it could be “moving to the trash bin”) and that’s it. it could take 30 minutes, an hour and nothing changed.
When I restarted the computer, I tried the same thing; I tried to rename the file - likewise, when deleting, the perpetual window “Preparing for deletion” popped up. In this case, it’s just enough to replace (rename) the file extension, in my case it was the “.mkv” extension, I replaced it with “.php” and the whole problem disappeared in a flash, the film was removed in two accounts. Therefore, I will highlight:
if the file is not deleted or just freezes when you try to delete it - just try replacing the file extension.
If you have a warning window pops up like this: “Unable to delete file. No access. The disk can be full or write-protected, or the file is occupied by another application. ”
That of course you can restart the computer and the problem most likely disappears, but what if you work with big amount windows or programs and wait for the computer to restart for too long, and then restore it all, in general, nothing good. In this case, I recommend using the “Unlocker” program - this program allows you to unlock a file or folder that you cannot delete, move, copy, and thus, after unlocking, you can do anything with this file, in our case, safely remove it. So, . It weighs quite a bit (1mb). Now install it
and right-click on the file or folder that we can not delete, then select the item "Unlocker"
and in the window that appears, click the "Unlock All" button.
You ask, why is this happening? Why do I seem to have closed all the programs with which this file it worked, but it still does not delete and pops up a window with a message that the file is being used by another program. Let's do an experiment. Download any movie through the torrent, run it and while the movie is downloaded, find this movie in the Downloads folder (You may have another folder, since I show the most common version) and try to delete it, nothing happens right?
Since, in this case, the movie (file) is downloaded (the process is over it) and it is used by the program, we close this program by clicking on the cross and it seems to be closed visually, but this is not so, it just rolled up, but the work ie the movie is still loading. Therefore, to completely close the program you need to click on the file menu - exit. If you do not know what a torrent is, I will draw an analogy with the usual file download when downloading, i.e. while the file is being downloaded, you will not be able to delete it, as work is underway, the process is over it. Maybe this is not a very good example, but I think the point is clear.
Well, I think that's all, this program will not take up much space on your computer, but it will always be exactly the only way to help out when deleting a file or folder.
Sometimes there are times when some files simply refuse to be deleted! When you try to delete, a window pops up with headers like this: “ Unable to delete [filename]. The object is being used by another user or program . ”Or“ Unable to delete [filename]. No access . " Now I will show you how you can easily solve this problem ...
So let's get down to business. To remove the undelete files was invented such a cool utility like Unlocker. It helps you to quickly delete a stubborn file or folder, for example, when you see one of the error options shown in the screenshot:
The error in Figure 1 usually occurs if the file is now open in a program and is blocked from any attempts to change or delete. In the easy case, it is enough just to close the program, but in more complex ones it is not at all clear what to do, since there is not a single open program No, but the file is still not deleted! Figure 2 usually speaks about problems with file permissions, that is, the file is created by one user, and another user is trying to remove it. Well, in the third figure, the problem arises as a result of some incorrect actions, freezes or glitches of programs.
Let's proceed to the installation of the program:
There is nothing difficult in the installation itself, the only thing that would draw your attention is to uncheck the Babylon Toolbar checkbox, because it is completely unnecessary.
The easiest and most convenient way to use Unlocker is to launch it via the explorer menu:
1. We have an undeletable file 103.xls. Right-click choose unlockerBut what should the user do if the malicious object does need to be deleted without fail ?
It turns out?
Do you think the files are erased after clearing the recycle bin?